Referred to as Inconel 718, the astm b637 n07718 Rod is a Gamma Prime strengthened alloy. The specification used to manufacture the is astm b637, which states that the material, which in this case is the astm b637 uns n07718 round bar is to follow recommended procedures in order to carry out certain treatments such as solution treatment, annealing treatment, stabilizing treatment, as well as a precipitation hardening treatment. The specified sb637 uns n07718 Hex Bar is manufactured with good quality raw materials that offer excellent mechanical properties at not only elevated temperatures but at cryogenic temperatures as well.
ASTM B637 UNS N07718 Round Bar
ASME SB637 UNS N07718 Hexagonal Bar
ASME B637 UNS N07718 Bar
Since the asme sb637 uns n07718 hexagonal bar is well suited to be used for temperatures up to a temperature of around 1300 F, they can be applied in the fields of rocket motors, gas turbine components, and thrust reversers, nuclear fuel element spacers, as well as in cryogenic storage tanks. The asme b637 n07718 round bar is one such allot that could be readily worked and age hardened.
Although the b637 n07718 square bar is classified as moderate to difficult to machine, it, however, can be machined with the use of conventional production methods at satisfactory rates. Typically, the b637 uns n07718 bar can be sold in a solution annealed temper but these bars could also be ordered in either of the following conditions i.e. - aged or cold worked or they could be cold worked & aged.
ASME SB637 N07718 Round bar size | Diameter: 3-~800mm |
---|---|
B637 N07718 Hex Bar size | 2-100mm A/F |
ASTM B637 N07718 Flat bar size | Thickness: 2 -100mm |
Width: 10 to 500mm | |
ASME SB637 UNS N07718 Square bar size | 4 to 100mm |
ASTM B637 N07718 Angle bar size (in mm) | 3*20*20~12*100*100 |
SB637 N07718 Section | 3.0 to 12.0mm thickness |
B637 UNS N07718 Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
SB 637 UNS N07718 Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
ASME SB 637 N07718 Billet Size | 1/2" to 495mm Diameter |
ASTM B637 UNS N07718 Rectangles Size | 33 x 30mm to 295 x 1066mm |
B637 N07718 Round Bar Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
ASTM B637 N07718 Round Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
ASTM B637 UNS N07718 Round Bar | ASME SB637 UNS N07718 Flat Bar |
ASME SB637 N07718 Bars | ASTM B637 N07718 Flat Bar Black |
B637 N07718 Rounds | ASTM B637 N07718 Flat Bars Bright |
ASTM B637 N07718 Bright Bars | SB637 N07718 Flat Bar Polished |
ASME SB637 UNS N07718 Rods | ASME SB637 N07718 Flat Bars Cold Drawn |
B637 N07718 Square Bar Cold Drawn | ASME SB637 N07718 Bright Bar material |
ASTM B637 N07718 Rod | ASTM B637 UNS N07718 Flat Bar Annealed |
SB637 N07718 Round Bars | ASME SB637 N07718 Flat Bars |
B637 UNS N07718 Hex Bar | B637 N07718 Threaded Bar |
ASME SB637 N07718 Square Bars Polished | ASTM B637 UNS N07718 Bright Bar Hot Rolled |
ASME SB 637 N07718 Hex Bar Bright | ASME SB637 UNS N07718 Hollow Bar |
SB 637 UNS N07718 Rectangular Bar Annealed | ASTM B637 N07718 Polished Hex Bars |
ASTM B637 UNS N07718 Hex Bar Polished | ASTM B637 N07718 Hexagonal Bars |
ASME SB 637 N07718 Rectangular Bar | B637 UNS N07718 Threaded Bar Black |
ASTM B637 N07718 Hex Bar Annealed | B637 UNS N07718 Cold Drawn Round Bars |
ASTM B637 N07718 Forged Bars | SB 637 UNS N07718 Polished Bar |
Tolerances for Cold Drawn Inconel 600 Round Bar | ||
---|---|---|
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round |
≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
Flat (thickness) |
< 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
Flat (width) |
< 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |