Inconel 625 round bar are nickel and molybdenum deliver for resistance to non-rusting atmospheres. Inconel 625 round Bars are also a nickel chromium molybdenum niobium alloy, abounding in the hot functioned and hardened condition. There are some features of Inconel 625 round bar such as form contains Round, Square, Hex (A/F), Rectangle etc. speculations contains ASTM B446 /ASTM SB446 etc. whereas, dimensions contains EN, DIN, JIS, ASTM, BS, ASME, AISI.
Inconel 625 Round Bar
Alloy 625 Rod
Inconel 625 Flat Bar
Inconel 625 Flat Bar is used for showery corrosion applications and is accepted for pressure containers in a temperature range from 196 Degree C to 450 Degree C. whereas if we talk about Inconel 625 Hex Bar so it can be completely melted back into the matrix when the sample is heat. Alloy 625 Bars are also appropriate for combustion system change linings, compressor vanes, turbine seals, and thrust cavity tubing for rocket. Similarly Inconel 625 Square Bar has decent resistance to acids, such as nitric, sulfuric, hydrochloric and phosphoric, as well as to alkalis and many other acids makes possible the construction of thin structural parts of high heat broadcast.
Inconel 625 Round Bar
Inconel 625 Bar provide the best superiority bars to their customers internationally since they are the important manufacturer and contractor of this bar. Inconel 625 Bar is distributed from our company in different areas to their customers and delivers the best packaging ways to them. The Tarang Steel offers several services to their customers and improves their packaging quality so that the customer is brought with the damage free crops. The products also include Alloy 625 Rod which are being transported form door to door to their customers on time.
Specifications | ASTM B446 / ASTM SB446 |
size | 2-100mm A/F |
---|---|
Square bar size | 4 to 100mm |
Flat bar size | Thickness: 2 -100mm Width: 10 to 500mm |
Round bar size | Diameter: 3-~800mm |
Rectangles Size | 33 x 30mm to 295 x 1066mm |
Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
Section | 3.0 to 12.0mm thickness |
Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
Billet Size | 1/2" to 495mm Diameter |
Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
Surface | Hot Rolled Pickled, Bright, Sand Blasting Finished, Cold Drawn, Hairline, Polished |
Condition | Hardened & tempered, annealed |
Technique | Inconel 625 Cold Drawn, Hot Rolled, Forged Round Bar,Cold Rolled, Rod |
Processing | Bar cutting to 650mm |
Form | Round, Welding Rod, T-Bar, Rod, Precision Ground Bar, Channel Bar, Square, Flat Bar, Blocks, Round Rod, Hollow, Rings, Rectangle, Hex (A/F), Triangle, Threaded, Profiles, Billet, Ingot, I/H Bar, Half Round Bar, Forging etc. |
Price of Inconel 625 Round Bar | Nickel 625 Round Bar Price in India (INR) | Nickel 625 Round Bar Price in USD | Nickel 625 Round Bar Price in UAE Dirham |
---|---|---|---|
625-ROUND BAR- 65 MM - 2.4856 | INR 2,536 | $34.16 | 125.47 UAE Dirham |
625-ROUND BAR- 60 MM - 2.4856 | INR 2,200 | $29.63 | 108.85 UAE Dirham |
625-ROUND BAR- 12.7MM - 2.4856 | INR 3,162 | $42.59 | 156.44 UAE Dirham |
ROUND BAR DIA DIA.32MM DIA SB 446 UNS N06625(INCONEL 625)(NICKEL ALLOY BAR) | INR 15,745 | $212.09 | 778.99 UAE Dirham |
Inconel 625 Round Rod | Alloy 625 Flat Bars |
Inconel 625 UNS N06625 Bars | Inconel alloy 625 Flat Bar Black |
625 Inconel Rounds | Nickel Alloy 625 Flat Bars Bright |
Inconel alloy 625 Bright Bars | Inconel 625 ASTM B166 Flat Bar Polished |
Alloy 625 Rods | Inconel 625 UNS N06625 Flat Bars Cold Drawn |
625 Inconel Square Bars Cold Drawn | Inconel 625 UNS N06625 Bright Bars material |
Nickel Alloy 625 Rod | Inconel 625 Flat Bars Annealed |
Inconel 625 ASTM B166 Round Bars | Inconel 625 UNS N06625 Flat Bar stock |
Inconel 625 DIN 2.4856 Hex Rod | 625 Inconel Threaded Bars |
Inconel 625 UNS N06625 Square Bar Polished | Inconel 625 Bright Bars Hot Rolled |
ASTM B166 UNS N06625 Hex Rod Bright | Alloy 625 Hollow Bars |
Nickel 625 Rectangular Bar Annealed | Inconel alloy 625 Polished Hex Rod |
Inconel 625 Hex Rod Polished | Nickel Alloy 625 Hexagonal Rod |
ASTM B166 UNS N06625 Rectangular Bars | Inconel 625 DIN 2.4856 Threaded Rod Black |
Inconel alloy 625 Hex Bar Annealed | Inconel 625 DIN 2.4856 Cold Drawn Round Bars |
Nickel Alloy 625 Forged Rod | Nickel 625 Polished Bars |
Round Bar | ||||||||
---|---|---|---|---|---|---|---|---|
Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
2-1/2" | 7.576 | 24.856 | ||||||
2-5/8" | 8.354 | 27.409 | ||||||
2-3/4" | 9.169 | 30.083 |
Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
Inconel 625 | 0.10 max | 0.50 max | 0.50 max | 0.015max | – | 5.0 max | 58.0 min | 20.0 – 23.0 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
UNS: | N06625 |
Specifications: | ASTM B446, AMS 5666, AMS 5837 |
international Specifications: | ISO 9723, ISO 9724, ISO 9725, VdTüV 499, BS3076NA21, EN 10095, DIN 17752, DIN 17753, DIN 17754, WERKSTOFF Nr 2.4856 |
H&T | Hardened and tempered. |
ANN | Annealed |
PH | Precipitation hardened. |
Alloy | Product form | Dimension |
---|---|---|
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; cold drawn, annealed | Dia=12.0 mm, Weight=1.0 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; cold drawn, annealed | Dia=16.0 mm, Weight=1.7 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; annealed, peeled | Dia=16.0 mm, Weight=1.7 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; cold drawn, annealed | Dia=16.0 mm, Weight=1.7 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; annealed, peeled | Dia=20.0 mm, Weight=2.7 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; hot worked, annealed, peeled | Dia=25.0 mm, Weight=4.5 kg/m |
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Rod; hot finished, machined, annealed | Dia=30.0 mm, Weight=6.1 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; hot worked, annealed, peeled | Dia=40.0 mm, Weight=10.6 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; hot finished, annealed, peeled | Dia=44.5 mm, Weight=13.1 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; peeled, annealed | Dia=50.8 mm, Weight=17.1 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod; forged, peeled, annealed | Dia=65.4 mm, Weight=26.7 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo | Rod; machined, annealed, forged | Dia=76.2 mm, Weight=38.5 kg/m |
INCONEL 625 (61 Ni/22 Cr/9 Mo) | Rod; annealed, peeled, hot worked | Dia=81.0 mm, Weight=42.5 kg/m |
ALLOY 625 (61 Ni/22 Cr/9 Mo) | Rod;hot worked, peeled, annealed, | Dia=85.0 mm, Weight=47.9 kg/m |
Tolerances for Cold Drawn Inconel 625 Round Bar | ||
---|---|---|
Shape / Section | Size, diameter or width across flats | Permitted variation |
mm | mm | |
Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
Inconel 625 Round Bar (BS 970-3) Tolerances
Turned inconel 625 round bar Tolerances | |
---|---|
inconel 625 round bar Size, diameter | Permitted variation |
mm | mm |
≧ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 120 > 120 ≦ 180 > 180 ≦ 250 > 250 ≦ 315 > 315 ≦ 400 > 400 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 + 0 to - 0.160 + 0 to - 0.185 + 0 to - 0.210 + 0 to - 0.230 + 0 to - 0.250 |
Tolerances of Precision Inconel 625 Round Bar
Precision Nickel Alloy 625 Round Bar Tolerances | ||||
---|---|---|---|---|
Section | Size, diameter |
Permitted overall variation | ||
Class A | Class B | Class C | ||
mm | mm | mm | mm | |
Round | ≧ 6 <75 | 0.05 | 0.025 | 0.013 |
Tolerance of Inconel 2.4856 Bright Round Bar
inconel 625 round bar Tolerance ISO “H” Series in MM | ||||||||
---|---|---|---|---|---|---|---|---|
NOMINAL SIZE | h5 | h6 | h7 | h8 | h9 | H10 | H11 | h12 |
DIAMETER mm | ||||||||
~ to 3 | +0.004/0 | +0.006/0 | +0.01/0 | +0.014/0 | +0.025/0 | +0.04/0 | +0.06/0 | +0.1/0 |
over 3 to 6 | +0.005/0 | +0.008/0 | +0.012/0 | +0.018/0 | +0.03/0 | +0.048/0 | +0.075/0 | +0.12/0 |
over 6 to 10 | +0.006/0 | +0.009/0 | +0.015/0 | +0.022/0 | +0.036/0 | +0.058/0 | +0.09/0 | +0.15/0 |
over 10 to 18 | +0.008/0 | +0.011/0 | +0.018/0 | +0.027/0 | +0.043/0 | +0.07/0 | +0.11/0 | +0.18/0 |
over 18 to 30 | +0.009/0 | +0.013/0 | +0.021/0 | +0.033/0 | +0.052/0 | +0.084/0 | +0.13/0 | +0.21/0 |
over 30 to 50 | +0.011/0 | +0.016/0 | +0.025/0 | +0.039/0 | +0.062/0 | +0.1/0 | +0.16/0 | +0.25/0 |
over 50 to 80 | +0.013/0 | +0.019/0 | +0.03/0 | +0.046/0 | +0.074/0 | +0.12/0 | +0.19/0 | +0.3/0 |
over 80 to 120 | +0.015/0 | +0.022/0 | +0.035/0 | +0.054/0 | +0.087/0 | +0.14/0 | +0.22/0 | +0.35/0 |
over 120 to 180 | +0.018/0 | +0.025/0 | +0.04/0 | +0.063/0 | +0.1/0 | +0.16/0 | +0.25/0 | +0.4/0 |
over 180 to 250 | +0.02/0 | +0.029/0 | +0.046/0 | +0.072/0 | +0.115/0 | +0.185/0 | +0.29/0 | +0.46/0 |