According to this specification, the term welding in astm b366 material applies to either butt welding or socket welding components. These components include parts such as the versatile astm b366 elbow along with bends, caps, tees, reducers, lap-joint, as well as stub ends.
ASTM B366 Fittings
ASME SB366 Reducer
ASTM B366 Elbow
The asme sb366 fittings are produced from either nickel or nickel based alloys which exhibit properties such as good tensile strength and high heat resistance. The astm b366 fittings could be formed by a combination of 2 or more of the following methods i.e. - upsetting, hammering, extruding, rolling, bending, pressing, piercing, or fusion welding.
Chemical and product analyses performed on the fitting, in this case, asme sb366 reducer needs to conform to the prescribed chemical composition. A Hydrostatic test of wrought b366 fittings is not required according to this specification.The specification also caters to those asme sb366 stub end which is either produced seamless or they are to be welded.
|ASME SB366 Pipe Fittings size||ASTM B366 Seamless Butt Weld Fittings: 1/2" - 10"
ASME SB366 Welded Butt Weld Fittings: 1/2" - 48"
|ASTM B366 Pipe Fittings Dimensions||ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10|
|B366 Fittings Thickness||SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75|
|ASTM B366 Pipe fittings Types||
|ASTM B366 FittingsType||DN15-DN1200|
|ASME SB366 Buttweld Fitting Connection||Welding|
|Bending Radius||R= 2D, 6D, 1D, 5D, 8D, 3D, 10D or Custom B366 Pipe Fitting|
|Size Range||½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) SB366 Buttweld Fitting|
|ASTM B366 Elbows|| Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D .
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
|ASTM B366 Fittings Manufacturing process||Push, Press, Forge, Cast, etc.|
|ASTM B366 Buttweld Pipe Fittings Test Certificates||EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
|We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175|
CAPS – ANSI B 16.9 dimension
|Dimension in mm|
|ASME SB366 Fittings||ASTM B366 Pipe Fitting|
|B366 90 Degree Elbow||SB366 End Cap|
|ASTM B366 45 Degree Elbow||ASME SB366 Buttweld Fitting|
|B366 1D Elbow||SB366 Short Stub End|
|ASME SB366 Stub End||ASME SB366 Pipe Cap|
|ASME SB366 3D Elbow||ASTM B366 End Cap|
|ASTM B366 5D Elbow||ASTM B366 Reducer|
|ASME SB366 Buttweld Fittings||SB366 Pipe Bend|
|ASTM B366 Pipe Fittings||B366 Long Stub End|
|ASME SB366 Eccentric Reducer||B366 Long Radius Elbow|
|ASTM B366 Concentric Reducer||B366 Short Radius Elbow|
|ASTM B366 Equal Cross||ASME SB366 Pipe Cap|
|SB366 Lateral Tee||ASME SB366 Cross Tee|
|SB366 Reducing Cross||ASME SB366 Equal Cross|
|ASTM B366 Equal Tee||ASTM B366 Stub End|
|SB366 Concentric Reducer||ASTM B366 5D Elbow|
|Fittings Types||90º LRs, 90º SRs, 45º Elbows,
Concentric Reducers, Eccentric Reducers,
Tees, Reducing Tees and Stub Ends Fittings
|Sizes||1/2" – 12"|
|Schedules||Sch 10S - 80S|