astm b424 uns n08825 fittings are an austenitic nickel based alloy. Aside from nickel, iron and chromium in the alloy, the b424 uns n08825 pipe fittings contain additions of molybdenum, copper and titanium. The b424 n08825 buttweld fittings were developed to create provisions with regards to exceptional corrosion resistance in both oxidative and reductive environments.
ASTM B424 UNS N08825 Fittings
ASME SB424 UNS N08825 Reducer
ASTM B424 N08825 Buttweld Fittings
The alloy used to make astm b424 n08825 stub end is resistant to not only chloride ion stress related corrosion cracking but it is resistant to localized attack such as pitting. The addition of titanium stabilizes the specified alloy sb 424 uns n08825 reducer against sensitization that occurs during welding making the alloy resistant to intergranular attack.
Therefore, the asme sb424 uns n08825 pipe cap could be used in an as welded condition even after being exposed to temperatures in a range which could typically sensitize any unstabilized grades of stainless steels. The fabrication of b424 uns n08825 elbow is typical of nickel based alloy. Since the alloy has good fabricability, the material is readily formable and weldable by a variety of conventionally used techniques.
|ASTM B424 N08825 Pipe Fittings size||ASTM B424 UNS N08825 Seamless Butt Weld Fittings: 1/2" - 10"
ASTM B424 UNS N08825 GRADE 1 Welded Butt Weld Fittings: 1/2" - 48"
|ASME SB424 N08825 Pipe Fittings Dimensions||ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10|
|SB 443 UNS N08825 Fittings Thickness||SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75|
|ASTM B424 UNS N08825 Pipe fittings Types||
|ASTM B424 UNS N08825 FittingsType||DN15-DN1200|
|ASTM B424 N08825 Buttweld Fitting Connection||Welding|
|Bending Radius||R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom ASME SB424 UNS N08825 Pipe Fitting|
|Size Range||½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) B424 UNS N08825 Buttweld Fitting|
|ASTM B424 Incoloy 825 Elbows|| Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D .
Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
|ASTM B424 UNS N08825 Fittings Manufacturing process||Push, Press, Forge, Cast, etc.|
|ASTM B424 UNS N08825 Buttweld Pipe Fittings Test Certificates||EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
|We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175|
|Nominal Pipe Size||Outside diameterat bevel||Center-to-End|
|ASTM B424 UNS N08825 GRADE 1 Fittings||ASTM B424 UNS N08825 Pipe Fitting|
|ASME SB424 UNS N08825 90 Degree Elbow||B424 UNS N08825 End Cap|
|ASME SB424 N08825 45 Degree Elbow||ASTM B424 N08825 Buttweld Fitting|
|SB 443 UNS N08825 1D Elbow||UNS N08825 ASME SB-443 Short Stub End|
|ASTM B424 N08825 Stub End||ASTM B424 UNS N08825 GRADE 1 Pipe Cap|
|ASTM B424 N08825 3D Elbow||ASTM B424 Incoloy 825 End Cap|
|ASTM B424 UNS N08825 5D Elbow||ASTM B424 Incoloy 825 Reducer|
|ASTM B424 UNS N08825 GRADE 1 Buttweld Fittings||B424 UNS N08825 Pipe Bend|
|ASME SB424 N08825 Pipe Fittings||SB 443 UNS N08825 Long Stub End|
|ASTM B424 N08825 Eccentric Reducer||SB 443 UNS N08825 Long Radius Elbow|
|ASTM B424 Incoloy 825 Concentric Reducer||ASME SB424 UNS N08825 Short Radius Elbow|
|ASME SB424 N08825 Equal Cross||ASTM B424 UNS N08825 GRADE 1 Pipe Cap|
|B424 UNS N08825 Lateral Tee||ASTM B424 N08825 Cross Tee|
|UNS N08825 ASME SB-443 Reducing Cross||ASTM B424 N08825 Equal Cross|
|ASTM B424 UNS N08825 Equal Tee||ASTM B424 Incoloy 825 Stub End|
|B424 UNS N08825 Concentric Reducer||ASME SB424 N08825 5D Elbow|
|Fittings Types||90º LRs, 90º SRs, 45º Elbows,
Concentric Reducers, Eccentric Reducers,
Tees, Reducing Tees and Stub Ends Fittings
|Sizes||1/2" – 12"|
|Schedules||Sch 10S - 80S|