Resembling alloy 400, the modified Monel K500 Plate contains controlled additions of Titanium and Aluminium added to its alloy. In comparison to Alloy 400, this grade of Nickel K500 Foil has been subjected to a heat treatment, a procedure which improves not only its tensile strength but also its toughness properties. Speaking about its strength, the Monel Alloy K500 Coil has two times the tensile strength of alloy 400, although its corrosion resistance properties are similar to Monel 400.
Monel K500 Plate
Alloy K500 Sheet
Nickel K500 Foil
Therefore, the Monel Werkstoff No 2.4375 Sheets come highly recommended by most manufacturers for use in industries such as the marine industry, chemical processing as well as in the oil extraction industry. Monel 2.4375 Shim Stock in all sizes and forms. In fact, due to its good weldability and machinability properties, the Alloy K500 Sheet can be produced into a doctor blade, which is used in the pulp and paper industry, mainly in the continuous production of paper, where these doctor blades separate the paper strip from rollers.
Monel K500 Plate
In addition to this, the alloy has good resistance to acidic and alkaline media, which makes the Monel UNS N05500 Plates an ideal material for the pulp and paper industry, as the components are constantly in contact with bleaches or various chemicals and with water as well. The ASTM B127 UNS N05500 Strip is particularly resistant to sour gas containing environments and exhibits excellent mechanical properties at temperatures ranging from sub-zero up to about 480C.
2.4375 Monel K500 Shim Sheet is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness.
ASTM Specification | ASTM B127 / ASME SB127 |
---|---|
Standard | MSRR, AMS, BS |
Length & Sizes | 1000 mm x 2000 mm, 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1250mm x 2500mm, 1500mm x 3000mm to 6000mm, 2000mm x 4000mm to 6000mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm, 2m, 2.44m, 3m, 36" X 120" or 48" X 144", 4' x 8', Cut to size available |
Thickness | 0.1mm to 100 mm Thk |
Width | 10-2500mm |
Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Temper | Annealed |
Condition | Polished on both sides |
Finish | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
Stock in form of | Plate, Sheet, Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Clad Plate, Rolling Sheet, Flat Sheet, Rolling Plate, Flat Shim, Blank (Circle), hot rolled, cold rolled, annealed, soft annealed, descaled, sheared, tread plate, Checker Plate |
Value Added Service | Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Dealers & Distributor of | SAIL, ESSAR, JINDAL, TATA, BHUSHAN, INDIAN, POSCO, JISCO, TISCO, LISCO, BAOSTEEL IMPORTED material |
Test Report |
|
Profiling |
To provide a full profiling service we use numerous profiling methods including:
|
Specialized in |
|
We offer a comprehensive services designed to add value to your project: plasma cutting, waterjet cutting, laser cutting, bending and mechanical processing, edge preparation, welding, sawing and shearing. |
Price of Monel K500 Plate | UNS N05500 Plate Price in India (INR) | Monel Alloy K500 Plate Price in USD | ASME SB127 Alloy K500 Plate Price in UAE Dirham |
---|---|---|---|
MONEL(NICKEL) SHEATH(PLATE) ALLOY K500 - 5.00 MM | INR 1,514 | $20.35 | 74.74 UAE Dirham |
Monel K500 Chequered Plate | Alloy Monel K500 Quarto Plate |
Alloy K500 Clad Plate | Monel grade K500 Tisco Plate |
Nickel Alloy K500 Chequer Plate | Monel 2.4375 Tread Plate |
Monel grade K500 Checker Plate | Monel Alloy K500 Polished Plate |
Monel 2.4375 Plate Mirror Finish | Alloy K500 Chequered Plate |
Monel Alloy K500 Plate Brushed Finish | Monel K500 Hot Rolled Sheet |
Alloy K500 10mm Plate | Monel grade K500 Cold Rolled Sheet |
Alloy K500 1/4 Inch Plate | Nickel K500 UNS N05500 Perforated Sheet |
Nickel K500 UNS N05500 Plate | ASTM B127 UNS N05500 Rolling Plate |
Alloy Monel K500 Hot Rolled Plate | Monel Alloy K500 Perforated Plate |
ASTM B127 UNS N05500 Cold Rolled Plate | Nickel K500 Bbq Plate |
Nickel K500 Plate 2b Finish | Alloy K500 Diamond Plate |
Nickel K500 Plate Mill Finish | Nickel Alloy K500 Thin Plate |
Monel grade K500 Custom Cut Plate | ASTM B127 UNS N05500 Sheet |
2.4375 Monel K500 Shim Sheet | ASTM B127 Alloy K500 Foil |
ASTM B127 Alloy K500 Plate | ASTM B127 Alloy K500 Coil |
Monel 2.4375 Shim | Monel K500 Nickel Clad Plate |
Alloy K500 Monel 2.4375 Cold Rolled Plate | Monel K500 UNS N05500 Flat Plate |
Monel Grade K500 Polished Plate | Monel N05500 4mm tdick Plate |
Monel K500 UNS N05500 Flat Plate | Monel UNS N05500 Sheet |
UNS N05500 Monel K500 Strip | Monel UNS N05500 Polish Plate |
Alloy K500 B127 Coil | Monel UNS 5500 2D Plate |
Monel K500 ASTM B127 Hot Rolled Plate | Monel K500 Nickel Clad Plate |
Monel K500 Steel Polished Cold Drawn Plate | Monel K500 Grade Slitting Coil |
Monel K500 UNS N05500 Checkered Plate | Alloy K500 Laser Cut Plate |
ASTM B127 UNS N05500 Embossed Plate | Alloy K500 UNS N05500 Plasma Cutting Plate |
UNS N05500 Plate Plate Modulus of Rigidity
|
66 kN/mm²
|
UNS: | N05500 |
Specifications: | QQ N 286 |
international Specifications: | WERKSTOFF Nr 2.4375 |
Alloy K500 Plate Melting Point
|
1350°C
|
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Monel K500 | 8.44 g/cm3 | 1350 °C (2460 °F) | Psi – 160000 , MPa – 1100 | Psi – 115000 , MPa – 790 | 20 % |
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel K500 | 0.25 max | 1.5 max | 0.5 max | 0.010 max | 27.00 – 33.00 | 0.5 – 2 | 63.00 min |
STANDARD | WERKSTOFF NR. | UNS |
Monel K500 | 2.4375 | N05500 |
ASTM B127 Alloy K500 Plate Imperial Dimensions
Plate Surface finish | Gauge (in) | Width (max in) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed Plate | 10–24 | 72* |
2D – Cold rolled, heat treated, pickled plate | 12–24 | 60 |
BA Mexinox only | 18–28 | 48 |
Polished plate (not brushed) | 11–24 | 60 |
Temper rolled plate Mexinox only | 13–29 | 48 |
ASTM B127 K500 Alloy Plate Metric Dimensions
Plate Surface finish | Thickness (mm) | Width (max mm) |
---|---|---|
2B – Cold rolled, heat treated, pickled, skin passed plate | 0.25–8.0 | 2032 |
2D – Cold rolled, heat treated, pickled plate | 0.4–6.35 | 1524 |
2E – Cold rolled, heat treated, mechanically descaled plate | 0.4–8.0 | 2032 |
2R – Cold rolled, bright annealed plate | 0.25–3.5 | 1524 |
2H – Work hardened plate | 0.4–6.35 | 1524 |
Polished, brushed plate | 0.5–4.0 | 1524 |
Size (in inches)
|
Size (in mm)
|
---|---|
.125"
|
3.18mm
|
.134"
|
3.40mm
|
.156"
|
3.96mm
|
.187"
|
4.75mm
|
.250"
|
6.35mm
|
.312"
|
7.92mm
|
.375"
|
9.53mm
|
.500"
|
12.7mm
|
.601"
|
15.9mm
|
.750"
|
19.1mm
|
.875"
|
22.2mm
|
1"
|
25.4mm
|
1.125"
|
28.6mm
|
1.250"
|
31.8mm
|
1.500"
|
38.1mm
|
1.750"
|
44.5mm
|
2"
|
50.8mm
|
2.500"
|
63.5mm
|
3"
|
76.2mm
|
Thickness | Alloy | Plate Weight per Unit Area | Density |
---|---|---|---|
3/16 inches | Monel K500 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | Monel K500 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | Monel K500 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | Monel K500 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | Monel K500 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | Monel K500 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | Monel K500 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | Monel K500 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | Monel K500 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | Monel K500 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | Monel K500 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | Monel K500 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | Monel K500 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | Monel K500 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | Monel K500 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | Monel K500 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |