Stainless Steel 310 Sheet
Stainless Steel 310 Sheet Specification
| ASTM Specification | ASTM A240 / ASME SA240 |
|---|---|
| Thickness | 0.1mm to 100 mm Thk |
| Standard | MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Width | 10-2500mm |
| Temper | Annealed |
| Finish | Hot rolled plate (HR), 2B, BA NO(8), 2D, Cold rolled sheet (CR), SATIN (Met with Plastic Coated) |
| Condition | Polished on both sides |
| Value Added Service | Heat Treatment, Annealed, Cladding, Pickling, Cutting, Bending, Forging, Polish, Rolling, Minor Fabrication Etc. |
| Dealers & Distributor of | JINDAL, ESSAR, TATA, SAIL, POSCO, JISCO, TISCO, LISCO, BHUSHAN, INDIAN, BAOSTEEL IMPORTED material |
Chemical Composition of ASTM A240 Type 310 Plate
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 310 |
min. | – | – | – | – | – | 24.0 | – | 19.0 | – |
| max. | 0.25 | 2.0 | 1.50 | 0.045 | 0.030 | 26.0 | 22.0 | – | ||
Mechanical Properties of SS 310 Coil
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 310 – 310S | 515 | 205 | 40 | 95 | 217 |
Physical Properties of 310 Stainless Steel Sheet
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
| 0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
| 310 – 310S | 7750 | 200 | 15.9 | 16.2 | 17.0 | 14.2 | 18.7 | 500 | 720 |
310 SS Plate Equivalent Grade
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 310 – 310S | S31000/S31008 | – | – | 1.4841/1.4845 | – | – | SUS 310 – 310S |