Stainless Steel 316L Sheet
Stainless Steel 316L Sheet Specification
| ASTM Specification | ASTM A240 / ASME SA240 |
|---|---|
| Thickness | 0.1mm to 100 mm Thk |
| Standard | MSRR, AMS, BS, ASTM A240 / ASME SA240 |
| Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
| Width | 10-2500mm |
| Temper | Annealed |
| Finish | Hot rolled plate (HR), 2B, BA NO(8), 2D, Cold rolled sheet (CR), SATIN (Met with Plastic Coated) |
| Condition | Polished on both sides |
| Value Added Service | Heat Treatment, Annealed, Cladding, Pickling, Cutting, Bending, Forging, Polish, Rolling, Minor Fabrication Etc. |
| Dealers & Distributor of | JINDAL, ESSAR, TATA, SAIL, POSCO, JISCO, TISCO, LISCO, BHUSHAN, INDIAN, BAOSTEEL IMPORTED material |
Chemical Composition of 316L Stainless Steel Plate
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
|---|---|---|---|---|---|---|---|---|---|---|
| 316L | min. | – | – | – | – | – | 16.0 | 2.0-3.0 | 10.0 | – |
| max. | 0.035 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | – | ||
Mechanical Properties of SS 316L Sheet
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
|---|---|---|---|---|---|
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316L | 485 | 170 | 40 | 95 | 217 |
ASTM A240 Type 316L Plate Physical Properties
| Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
|---|---|---|---|---|---|---|---|---|---|
| 0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
| 316L | 8000 | 193 | 15.9 | 16.2 | 17.5 | 16.3 | 21.5 | 500 | 740 |
316L SS Coil Equivalent Grade
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 316L | 1.4404 / 1.4435 | S31603 | SUS 316L | 316S11 / 316S13 | 03Ch17N14M3 / 03Ch17N14M2 | Z3CND17‐11‐02 / Z3CND18‐14‐03 | X2CrNiMo17-12-2 / X2CrNiMo18-14-3 |