Nickel 200 pipe
Alloy 200 Seamless Pipe Manufacturer, Check Price list of Nickel 200 Hot Finished Pipe
Being a nickel based alloy, this material shares many traits of its parent. For instance, Nickel 200 pipe exemplifies good mechanical properties over a wide range of temperature settings. The alloy has excellent resistance to many corrosive compounds in varying environments. The resistance of Nickel Alloy 200 Seamless Pipes to corrosion by distilled and natural waters is excellent, therefore the alloy can be used in those applications which involve the use of water.
Nickel 200 Pipe
Alloy 200 Seamless Pipe
Nickel 200 Hot Finished Pipe
Alloy 200 Pipe Delivering everywhere Worldwide, Leading Nickel Alloy 200 Pipes Supplier, View Nickel Alloy 200 Seamless Pipes Price Per Kg in India.
Furthermore, since this alloy also gives an excellent performance in flowing seawater even at high velocity, Alloy 200 Nickel Pipe are used in marine engineering purposes as well. On the other hand in hot water systems where the steam present contains corrosive compounds such as carbon dioxide and air in certain amounts, the corrosion rates of the alloy will initially be high. However, the rate of corrosion will decrease with time if conditions favour the formation of a protective film around the Alloy 200 Seamless Pipe.
Table of Content
- What is Nickel 200 pipe?
- Material Specification of Nickel 200 Pipe
- Price List of Nickel Alloy Pipe
- Wall Thickness & Length of Nickel 200 Pipe
- Weigth Chart of Nickel Alloy 200 Pipe
- Mechanical Properties Chart of Nickel Alloy 200 Pipe
- 200 Nickel Pipe Chemical Composition
- Equivalent grades of Nickel 200 pipe
- Pressure Rating of Din 2.4066 Pipe
- Standards and Specifications of Alloy 200 Pipe
Similar to most chromium based stainless steels, when Nickel 200 Hot Finished Pipe has been exposed to either reducing or neutral media or in an oxidizing atmosphere, the oxidative agent containing media permits the formation of a passivated oxide layer on the surface of the pipe. This oxide layer present on the surface of the Nickel Alloy 200 Pipes accounts for the alloys excellent resistance to corrosion in caustic environments as well. A drawback about using Alloy 200 Pipe is that the alloy is normally limited to service below a temperature of 600° F on account of graphitization.
| ASTM Specification | ASTM B161 / ASME SB161 |
|---|---|
| Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
| Nickel 200 Seamless Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
| Nickel Alloy 200 Welded Pipe Size | 5.0 - 1219.2 mm |
| Din 2.4066 EFW Pipe size | 5.0 - 1219.2 mm |
| Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| Nickel 200 UNS N02200 Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Nickel 200 pipe Length | Single Random, Double Random, Standard & Cut length Pipe |
| Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
| Form | Nickel 200 pipe are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
| Type of ASTM B161 200 Nickel Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW Nickel 200 pipe |
| Nickel 200 pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
| Marking on ASTM B161 UNS N02200 Pipe | All Nickel 200 Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| We can also cut, thread, and groove Nickel Alloy 200 Pipe to meet your specifications. Nickel 200 pipe Dimension ANSI/ ASME B36.10, B36.19, B2.1 | |
Thickness 9.0mm Alloy 200 Nickel Pipe stockist, 200 Nickel Seamless Pipe Supplier, Ready Stock of Alloy 200 Welded Pipe, Specialise in distributing Alloy 200 Nickel EFW Pipe,
| Types | Out diameter | Wall thickness | Length |
|---|---|---|---|
| NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
| Nickel 200 Seamless Pipe (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
| Nickel 200 Welded Pipe (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
|
NPS
|
Outside Diameter
|
Wall Thickness
|
Weight
|
Weight
|
|||
|
in
|
mm
|
in
|
mm
|
Sched
|
kg/Mtr
|
Lb/ft
|
|
|
1/2″
|
0.840
|
21
|
0.109
|
2.769
|
40 STD
|
1.268
|
0.851
|
|
0.147
|
3.734
|
80 STD
|
1.621
|
1.088
|
|||
|
3/4″
|
1.050
|
27
|
0.113
|
2.870
|
40 STD
|
1.684
|
1.131
|
|
0.154
|
3.912
|
80 STD
|
2.195
|
1.474
|
|||
|
1″
|
1.315
|
33
|
0.133
|
3.378
|
40 STD
|
2.501
|
1.679
|
|
0.179
|
4.547
|
80 STD
|
3.325
|
2.172
|
|||
|
1 1/4″
|
1.660
|
42
|
0.140
|
3.556
|
40 STD
|
3.385
|
2.273
|
|
0.191
|
4.851
|
80 STD
|
4.464
|
2.997
|
|||
|
1 1/2″
|
1.900
|
48
|
0.145
|
3.683
|
40 STD
|
4.048
|
2.718
|
|
0.200
|
5.080
|
80 STD
|
5.409
|
3.361
|
|||
|
2″
|
2.375
|
60
|
0.154
|
3.912
|
40 STD
|
5.441
|
3.653
|
|
0.218
|
5.537
|
80 STD
|
7.480
|
5.022
|
|||
|
2 1/2″
|
2.875
|
73
|
0.203
|
5.516
|
40 STD
|
8.629
|
5.793
|
|
0.276
|
7.010
|
80 STD
|
11.411
|
7.661
|
|||
|
3″
|
3.500
|
89
|
0.216
|
5.486
|
40 STD
|
11.284
|
7.576
|
|
0.300
|
7.620
|
80 STD
|
15.272
|
10.253
|
|||
|
4″
|
4.500
|
114
|
0.237
|
6.020
|
16.073
|
10.790
|
|
|
0.337
|
8.560
|
22.318
|
14.983
|
||||
|
6″
|
6.625
|
168
|
0.188
|
4.775
|
19.252
|
12.924
|
|
|
0.203
|
5.516
|
20.739
|
13.923
|
||||
|
0.219
|
5.563
|
22.318
|
14.983
|
||||
|
0.250
|
6.350
|
25.354
|
17.021
|
||||
|
0.280
|
7.112
|
40 STD
|
58.263
|
18.974
|
|||
|
0.312
|
7.925
|
31.334
|
21.036
|
||||
|
0.375
|
9.525
|
37.285
|
25.031
|
||||
|
0.432
|
10.973
|
80 XHY
|
42.561
|
28.573
|
|||
|
0.500
|
12.700
|
48.719
|
32.708
|
||||
|
8″
|
8.625
|
219
|
0.188
|
4.775
|
25.233
|
16.940
|
|
|
0.203
|
5.156
|
27.198
|
18.259
|
||||
|
0.219
|
5.563
|
29.286
|
19.661
|
||||
|
0.250
|
6.350
|
20
|
33.308
|
22.361
|
|||
|
0.277
|
7.036
|
30
|
36.786
|
24.696
|
|||
|
0.322
|
8.179
|
40
|
42.352
|
28.554
|
|||
|
0.375
|
9.525
|
49.216
|
33.041
|
||||
|
0.406
|
10.312
|
60
|
53.085
|
35.638
|
|||
|
0.500
|
12.700
|
80 XHY
|
64.627
|
43.388
|
|||
|
10″
|
10.750
|
273
|
0.188
|
4.775
|
31.588
|
21.207
|
|
|
0.219
|
5.563
|
36.689
|
24.631
|
||||
|
0.250
|
6.350
|
20
|
41.759
|
28.035
|
|||
|
0.307
|
7.798
|
30
|
51.002
|
34.240
|
|||
|
0.344
|
8.738
|
56.946
|
38.231
|
||||
|
0.365
|
9.271
|
40 STD
|
63.301
|
40.483
|
|||
|
0.438
|
11.125
|
71.852
|
48.238
|
||||
|
0.500
|
12.700
|
60 XHY
|
81.530
|
54.735
|
|||
|
0.594
|
15.088
|
80
|
95.969
|
64.429
|
|||
|
12″
|
12.750
|
324
|
0.188
|
4.775
|
37.570
|
25.222
|
|
|
0.219
|
5.563
|
43.657
|
29.309
|
||||
|
0.250
|
6.350
|
49.713
|
33.375
|
||||
|
0.281
|
7.137
|
55.739
|
37.420
|
||||
|
0.312
|
7.925
|
61.735
|
41.445
|
||||
|
0.375
|
9.525
|
73.824
|
49.562
|
||||
|
0.406
|
10.312
|
79.727
|
53.525
|
||||
|
0.500
|
12.700
|
97.438
|
65.415
|
||||
|
0.562
|
14.275
|
108.966
|
73.154
|
||||
|
14″
|
14.000
|
356
|
0.188
|
4.775
|
41.308
|
27.732
|
|
|
0.219
|
5.563
|
48.012
|
32.233
|
||||
|
0.250
|
6.350
|
20
|
54.685
|
36.713
|
|||
|
0.281
|
7.137
|
61.327
|
41.172
|
||||
|
0.312
|
7.925
|
67.939
|
45.611
|
||||
|
0.375
|
9.525
|
STD
|
81.281
|
54.568
|
|||
|
0.438
|
11.125
|
40
|
94.498
|
63.441
|
|||
|
0.500
|
12.700
|
XHY
|
107.381
|
72.090
|
|||
| 0.625 |
15.875
|
132.983
|
89.278
|
||||
|
16”
|
16.000
|
406
|
0.188
|
4.775
|
47.290
|
21.748
|
|
|
0.219
|
5.563
|
54.980
|
36.910
|
||||
|
0.250
|
6.350
|
10
|
62.639
|
42.053
|
|||
|
0.281
|
7.137
|
70.268
|
47.174
|
||||
|
0.312
|
7.925
|
20
|
77.866
|
52.275
|
|||
|
0.344
|
8.738
|
85.677
|
57.519
|
||||
|
0.375
|
9.525
|
30 STD |
93.213
|
62.578
|
|||
|
0.438
|
11.125
|
108.433
|
72.797
|
||||
|
0.500
|
12.700
|
40 XHY |
123.289
|
82.770
|
|||
|
18″
|
18.000
|
457
|
0.219
|
5.563
|
61.948
|
41.588
|
|
|
0.250
|
6.350
|
70.593
|
47.393
|
||||
|
0.281
|
7.137
|
79.208
|
53.176
|
||||
|
0.312
|
7.925
|
20
|
87.792
|
58.939
|
|||
|
0.375
|
9.525
|
STD
|
105.144
|
70.588
|
|||
|
0.438
|
11.125
|
30
|
122.369
|
82.152
|
|||
|
0.500
|
12.700
|
XHY
|
139.198
|
93.450
|
|||
|
0.562
|
14.275
|
40
|
155.904
|
104.666
|
|||
|
0.625
|
15.875
|
172.754
|
115.978
|
||||
|
20″
|
20.000
|
508
|
0.250
|
6.350
|
78.547
|
52.733
|
|
|
0.282
|
7.163
|
88.458
|
59.386
|
||||
|
0.312
|
7.925
|
97.719
|
65.604
|
||||
|
0.375
|
9.525
|
20 STD
|
117.075
|
78.598
|
|||
|
0.438
|
11.125
|
136.305
|
91.508
|
||||
|
0.500
|
12.700
|
30 XHY
|
155.106
|
104.130
|
|||
|
0.594
|
15.088
|
40
|
183.378
|
123.110
|
|||
|
0.625
|
15.875
|
192.640
|
129.328
|
||||
|
0.688
|
17.475
|
211.368
|
141.901
|
||||
|
24″
|
24.000
|
610
|
0.250
|
6.350
|
94.456
|
63.413
|
|
|
0.281
|
7.137
|
106.029
|
71.183
|
||||
|
0.312
|
7.925
|
117.573
|
18.932
|
||||
|
0.375
|
9.525
|
20 STD
|
140.938
|
64.618
|
|||
|
0.438
|
11.125
|
164.176
|
110.219
|
||||
|
0.500
|
12.700
|
XHY
|
186.923
|
125.490
|
|||
|
0.625
|
15.875
|
232.410
|
156.028
|
||||
|
0.688
|
17.475
|
40
|
255.148
|
171.293
|
|||
|
0.750
|
19.050
|
277.401
|
186.233
|
||||
|
30″
|
30.000
|
762
|
0.250
|
6.350
|
118.318
|
79.433
|
|
|
0.281
|
7.137
|
132.851
|
89.189
|
||||
|
0.312
|
7.925
|
10
|
147.353
|
98.925
|
|||
|
0.375
|
9.525
|
STD
|
176.731
|
118.648
|
|||
|
0.438
|
11.125
|
205.983
|
138.286
|
||||
|
0.500
|
12.700
|
20 XHY
|
234.647
|
157.530
|
|||
|
0.625
|
15.875
|
30
|
292.066
|
196.078
|
|||
|
0.688
|
17.475
|
320.817
|
215.380
|
||||
|
0.750
|
19.050
|
348.988
|
234.293
|
||||
|
36″
|
36.000
|
914
|
0.250
|
6.350
|
142.180
|
95.453
|
|
|
0.281
|
7.137
|
159.672
|
107.196
|
||||
|
0.312
|
7.925
|
10
|
177.133
|
118.918
|
|||
|
0.375
|
9.525
|
STD
|
215.525
|
142.678
|
|||
|
0.438
|
11.125
|
247.790
|
166.353
|
||||
|
0.500
|
12.700
|
20 XHY
|
282.372
|
198.570
|
|||
|
0.625
|
15.875
|
351.723
|
236.128
|
||||
|
0.688 |
17.475
|
386.487
|
259.467
|
||||
|
0.750 |
19.050
|
420.576
|
282.353
|
||||
|
42″
|
42.000
|
1067
|
0.312
|
7.925
|
206.914
|
138.911
|
|
|
0.375
|
9.525
|
STD
|
248.319
|
166.708
|
|||
|
0.500
|
12.700
|
XHY
|
33.097
|
221.610
|
|||
|
0.750
|
19.050
|
492.163
|
330.413
|
||||
|
48″
|
48.000
|
1219
|
0.375
|
9.525
|
STD
|
284.112
|
190.738
|
|
0.438
|
11.125
|
331.404
|
222.487
|
||||
|
0.500
|
12.700
|
XHY
|
377.822
|
253.650
|
|||
|
0.750
|
19.050
|
563.750
|
378.473
|
||||
|
0.875
|
22.225
|
655.969
|
440.383
|
||||
| Nickel 200 Pipe | 4 inch Din 2.4066 Seamless Pipe |
| Din 2.4066 Pipes | Nickel 200 UNS N02200 Welded Pipes |
| 200 Nickel Seamless Steel Pipe | UNS N02200 Cold Drawn Welded Pipe |
| Din 2.4066 Welded Pipe | Alloy 200 Nickel Cold Drawn Pipe |
| Nickel 200 UNS N02200 ERW Pipe | Schedule 5S 200 Nickel Seamless Pipe |
| Alloy 200 Nickel EFW Pipe | Schedule 40 Alloy 200 Pipe |
| 200 Nickel Cold Drawn Seamless Pipes | Nickel 200 UNS N02200 Precision Pipe |
| Nickel 200 Seamless Steel Precision Pipe | High pressure Nickel Alloy 200 Pipe |
| Alloy 200 Cold Drawn Seamless Pipe | ASTM B161 200 Nickel Electropolished Pipe |
| Din 2.4066 Custom Pipe | Nickel 200 Cold Drawn Pipes |
| UNS N02200 Round Pipe | ASTM B161 UNS N02200 Exhaust Pipe |
| ASTM B161 200 Nickel Square Pipe | Nickel 200 UNS N02200 Thin Wall Pipe |
| ASTM B161 UNS N02200 Rectangular Pipe | Small diameter ASTM B161 200 Nickel pipe |
| 200 Nickel Hexagonal Pipe | Din 2.4066 Pipe material |
| Nickel 200 Bush Hex Pipe | Alloy 200 Precision Steel Pipes |
| Alloy 200 Nickel Fabricated Pipe | UNS N02200 Annealed pipe |
| UNS N02200 Beveled End Pipe | Alloy 200 Nickel Rectangle Pipe |
| Nickel Alloy 200 Cold Drawn Pipe | Cold Drawn Nickel 200 Welded Pipe |
Small Diameter Nickel Alloy 200 Cold Rolled Pipe Distributor. Ready Stock of ASTM B622 UNS N02200 Seamless Pipe, Excellent ERW 200 Nickel Pipe stockholder. Polished DIN 2.4066 Seamless Pipe Dealer, 2 inch UNS N02200 Pipe suppliers
Supplier of Nickel Alloy 200 Pipe
Nickel 200 Seamless Steel Precision Pipe
ASTM B161 200 Nickel Electropolished Pipe
200 Nickel Hexagonal Pipe
Cold Drawn Nickel 200 Welded Pipe
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | ??-2 | N-100M | Ni 99.2 |
Largest supplier of small-quantity Nickel 200 Bush Hex Pipe, 200 Nickel Pipe Distributor, Thickness 9.0mm ASTM B161 200 Nickel Round Pipe Trader, Wholesaler of Nickel 200 UNS N02200 Seamless Pipe. Suppliers and Stockists of Nickel 200 Hot Finished Pipe, 200 Nickel Annealed Pipe.
Pressure Rating of Din 2.4066 Pipe
|
Pipe O.D. (in.) |
Wall Thickness of Pipe (inches) | |||||||
|---|---|---|---|---|---|---|---|---|
| .028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
| Working Pressure (psig) | ||||||||
| 1/8 | 7900 | 10100 | ||||||
| 1/4 | 3700 | 4800 | 7000 | 9500 | ||||
| 5/16 | 3700 | 5400 | 7300 | |||||
| 3/8 | 3100 | 4400 | 6100 | |||||
| 1/2 | 2300 | 3200 | 4400 | |||||
| 3/4 | 2200 | 3000 | 4000 | 4600 | ||||
| 1 | 2200 | 2900 | 3400 | 3900 | 4300 | |||
Standards and Specifications of Alloy 200 Pipe
| UNS: |
N02200 |
|
Specifications: |
ASME SB-161, ASME SB-829, ASME SB-775, ASME SB-725 |
|
international Specifications: |
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 DIN 17740, 17750, 17751, 17752, 17753, 17754 Werkstoff Nr. 2.4060, 2.4066 |