Used to change the size of the pipe, a Nickel Reducer is very strong and resistant to corrosion. Nickel, as a metal, tends to be very ductile and malleable. These properties permit nickel as well as its many alloys to be shaped into fittings or rods, wire, tubes, and sheets. The Nickel Alloy Buttweld Tee is a good conductor of heat and electricity.
Nickel Pipe Fittings
Pure Nickel Elbow
Nickel Alloy Buttweld Tee
In addition, the Nickel Fittings tends to exhibit magnetic properties below a temperature of about 345°C. A Nickel Elbow, which is a very popular fitting can be used to change the direction of flow between two pipes. Furthermore, a Pure Nickel Elbow is considered to be very versatile and is generally available with an angle of either 22.5o, 45o or 90o
Nickel Tee proves to be useful in particular because they can be used to connect pipes of different diameters or tees can be used to change the direction of a pipe run, or they could be used for both simultaneously.
Nickel Alloy Pipe Fittings size | Nickel Seamless Butt Weld Fittings: 1/2" - 10" Pure Nickel Welded Butt Weld Fittings: 1/2" - 48" |
---|---|
Nickel Steel Pipe Fittings Dimensions | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10 |
Pure Nickel Fittings Thickness | SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75 |
Nickel FittingsType | DN15-DN1200 |
Pure Nickel Alloy Elbows | Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D . Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO |
Nickel Steel Buttweld Fitting Connection | Welding |
Bending Radius | R= 2D, 6D, 1D, 5D, 8D, 3D, 10D or Custom Pure Nickel Alloy Pipe Fitting |
Size Range | ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) Nickel Alloy Buttweld Fitting |
Nickel Fittings Manufacturing process | Push, Press, Forge, Cast, etc. |
Nickel Pipe fittings Types |
|
We provide Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175 |
Pure Nickel Fittings | Nickel Pipe Fitting |
Pure Nickel Alloy 90 Degree Elbow | Nickel Alloy End Cap |
Nickel Steel 45 Degree Elbow | Nickel Steel Buttweld Fitting |
Pure Nickel 1D Elbow | Nickel Short Stub End |
Nickel Steel Stub End | Pure Nickel Pipe Cap |
Nickel Alloy 3D Elbow | Pure Nickel Alloy End Cap |
Nickel 5D Elbow | Pure Nickel Alloy Reducer |
Pure Nickel Buttweld Fittings | Nickel Alloy Pipe Bend |
Nickel Steel Pipe Fittings | Pure Nickel Long Stub End |
Nickel Steel Eccentric Reducer | Pure Nickel Long Radius Elbow |
Pure Nickel Alloy Concentric Reducer | Pure Nickel Alloy Short Radius Elbow |
Nickel Steel Equal Cross | Pure Nickel Pipe Cap |
Nickel Alloy Lateral Tee | Nickel Alloy Cross Tee |
Nickel Reducing Cross | Nickel Steel Equal Cross |
Nickel Equal Tee | Pure Nickel Alloy Stub End |
Nickel Alloy Concentric Reducer | Nickel Steel 5D Elbow |
Nominal Pipe Size | All Fittings | All Fittings | All Fittings | Elbows/ Tees | 180° Return Bends | 180° Return Bends | 180 Deg Return Bends | Reducers | Caps |
---|---|---|---|---|---|---|---|---|---|
NPS | O.D. at Bevel (1), (2) | I.D. at End (1), (3), (4) |
Wall Thickness (3) | Centre-to-End Dimension A,B,C,M | Centre-to-Centre O | Back-to-Face K | Alignment of Ends U | Overall Length H | Overall Length E |
½ to 2½ | 0.06 -0.03 |
0.03 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
3 to 3 ½ | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
4 | 0.06 | 0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.12 |
5 to 8 | 0.09 -0.06 |
0.06 | Not less than 87.5% of nominal thickness | 0.06 | 0.25 | 0.25 | 0.03 | 0.06 | 0.25 |
10 to 18 | 0.16 -0.12 |
0.12 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
20 to 24 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.09 | 0.38 | 0.25 | 0.06 | 0.09 | 0.25 |
26 to 30 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.12 | … | … | … | 0.19 | 0.38 |
32 to 48 | 0.25 -0.19 |
0.19 | Not less than 87.5% of nominal thickness | 0.19 | … | … | … | 0.19 | 0.38 |
Grade | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 21500 , MPa – 148 | Psi – 67000 , MPa – 462 | 45 % |
Grades | Ni | C | Mo | Mn | Si | Fe | P | S | Cu | Cr |
Nickel 200 | 99.0 min | 0.15 max | – | 0.35 max | 0.1 max | 0.4 max | – | 0.01 max | 0.25 max | – |
Nickel 201 | Balance | 0.15 max | – | 0.35 max | 0.35 max | 0.40 max | – | 0.01 max | 0.25 max | – |
STANDARD | UNS | WERKSTOFF NR. | AFNOR | EN | JIS | BS | GOST |
Nickel 200 | N02200 | 2.4066 | N-100M | Ni 99.2 | NW 2200 | NA 11 | НП-2 |
Nickel 201 | N02201 | 2.4068 | – | LC-Ni 99 | NW 2201 | NA 12 | НП-2 |