Nickel 201 Round Bar
Alloy 201 Rod Manufacturer, Check Pure Nickel 201 Flat Bar Dimensions & Weight Chart
Similar to nickel based grade alloy 200, grade Nickel 201 round bar, too is referred to as commercially pure wrought nickel. Despite the fact that Alloy 201 Rod has properties which make it just like alloy 200, however, the distinction between both these alloy grades is with regards to the content of carbon. The content of carbon used to alloy the material used to make these bars is far lower i.e. a max of 0.02%. The lower carbon content present in the Pure Nickel 201 Flat bar is what aids the alloy in terms of the prevention of embrittlement.
Nickel 201 Round Bar
Alloy 201 Rod
Pure Nickel 201 Flat bar
A long established Suppliers of Nickel Alloy 201 Rods, One of India’s largest ASTM B160 Nickel 201 Hex Bar Manufacturer, Top-notch stockist of Alloy 201 Round Bar.
Typically embrittlement is caused by inter-granular carbon on exposure to conditions where the temperatures are often elevated or they could be caused by welding. The ASTM B160 Nickel 201 Hex Bar produced in our factory conforms to the ASTM B160 specification. The low carbon nickel alloy ie. UNS N02201 or referred to as Alloy 201 is available in various forms such as round, square, hexagonal, or rectangular solid section.
Table of Content
- What is Nickel 201 Round Bar?
- Din 2.4068 Round Bar Price List
- Specification List of 201 Nickel Round Bar
- Nickel Alloy 201 Round Bar Tolerances
- Sizes of Nickel 201 Round Bar
- Most Selling types of Nickel Alloy 201 Round Bar
- Mechanical Characteristics of Pure Nickel 201 Round Bar
- Chemical Equation of Nickel Alloy 201 Bar
- Equivalent grades of Nickel 201 Round Bar
- international Standard Specification of Nickel 200 Bar
The furnishing of these UNS N02201 Nickel Bright Bar could be by any one of the following processes i.e hot working, cold working, or annealed rods and bars. The Alloy 201 Round Bar is used in those times when alloy grade 200 experiences shortcoming, i.e. being used at elevated temperatures. Since these Nickel Alloy 201 Rods are not susceptible to graphitization, they tend to be well suited for applications that use higher temperature settings.
| Din 2.4068 Round bar size | Diameter: 3-~800mm |
|---|---|
| Nickel Alloy 201 Hex Bar size | 2-100mm A/F |
| Alloy 201 Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Nickel 201 UNS N02201 Square bar size | 4 to 100mm |
| ASTM B160 201 Nickel Angle bar size (in mm) | 3*20*20~12*100*100 |
| 201 Nickel Section | 3.0 to 12.0mm thickness |
| Alloy 201 Nickel Channel Bar (in mm) | 80 x 40 to 150 x 75 section; 5.0 to 6.0 thickness |
| ASTM B160 UNS N02201 Hollow Bar (in mm) | 32 OD x 16 ID to 250 OD x 200 ID) |
| UNS N02201 Billet Size | 1/2" to 495mm Diameter |
| Nickel 201 Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Nickel Alloy 201 Round Bar Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Alloy 201 Round Bar Surface | Bright, Hot Rolled Pickled, Cold Drawn, Sand Blasting Finished, Polished, Hairline |
| Nickel 201 Round Bar Condition | Hardened & tempered, annealed |
Specialise in distributing UNS N02201 Nickel Bright Bar, 201 Nickel Polished Bar are available in a wide range of Sizes, Held wide stock of Hot Rolled Nickel 201 Round Bar, Contact us today for Nickel 201 Square Bar Price List
| Tolerances for Cold Drawn Nickel 201 Round Bar | ||
|---|---|---|
| Shape / Section | Size, diameter or width across flats | Permitted variation |
| mm | mm | |
| Round | ≥6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 |
+ 0 to - 0.070 + 0 to - 0.085 + 0 to - 0.100 + 0 to - 0.120 + 0 to - 0.140 |
| Flat (thickness) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.250 + 0 to - 0.350 |
| Flat (width) | < 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 100 > 100 ≦ 130 > 130 ≦ 160 > 160 ≦ 320 |
+ 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.190 + 0 to - 0.220 + 0 to - 0.350 + 0 to - 1.00 + 1.00 to - 1.00 |
| Square and hexagon |
≥ 6 ≦ 18 > 18 ≦ 30 > 30 ≦ 50 > 50 ≦ 80 > 80 ≦ 105 |
+ 0 to - 0.090 + 0 to - 0.110 + 0 to - 0.130 + 0 to - 0.160 + 0 to - 0.250 |
| Type | SIZES (mm) | SIZES (Inches) | ISO Tolerance |
|---|---|---|---|
| Cold Drawn and Polish Round Bar | 3.00 – 75.00 | 1/8" – 3.00" | h8-h9-h10-h11 |
| Cold Drawn and Ground Bar | 10.00 – 75.00 | 5/6" – 2.50" | h8-h9-h10-h11 |
| Peeled and Polished Round Bar | 40.00 – 150.00 | 1.50" – 6.00" | h11, h11-DIN 1013 |
| Peeled and Ground Bar | 20.00 – 50.00 | 3/4″ – 2.00" | h9-h10-h11 |
| Nickel 201 Round Bar | Nickel 201 UNS N02201 Flat Bar |
| Din 2.4068 Bar | Alloy 201 Flat Bar Black |
| Nickel Alloy 201 Rounds | ASTM B160 201 Nickel Flat Bar Bright |
| Alloy 201 Bright Bar | 201 Nickel Flat Bar Polished |
| Nickel 201 UNS N02201 Rods | Din 2.4068 Flat Bar Cold Drawn |
| Nickel Alloy 201 Square Bar Cold Drawn | Din 2.4068 Bright Bar material |
| ASTM B160 201 Nickel Rod | Nickel 201 Flat Bar Annealed |
| 201 Nickel Round Bars | Din 2.4068 Flat Bar stock |
| Alloy 201 Nickel Hex Bar | Nickel Alloy 201 Threaded Bar |
| Din 2.4068 Square Bar Polished | Nickel 201 Bright Bar Hot Rolled |
| UNS N02201 Hex Bar Bright | Nickel 201 UNS N02201 Hollow Bar |
| ASTM B160 UNS N02201 Rectangular Bar Annealed | Alloy 201 Polished Hex Bar |
| Nickel 201 Hex Bar Polished | ASTM B160 201 Nickel Hexagonal Bar |
| UNS N02201 Rectangular Bar | Alloy 201 Nickel Threaded Bar Black |
| Alloy 201 Hex Bar Annealed | Alloy 201 Nickel Cold Drawn Round Bar |
| ASTM B160 201 Nickel Forged Bar | ASTM B160 UNS N02201 Polished Bar |
Top-notch Supplier of 201 Nickel Alloy Forged Bars, A long established Stockholder of ASTM B160 Alloy 201 Threaded Bar, Get in touch for assistance of Nickel UNS N02201 Bright Bar, One Stop Shop For All 201 Alloy Black Bar. Manufacturers of Nickel 2.4068 Round Bars.
Exclusive Ready Stock of ASTM B160 Alloy 201 Bar
ASTM B160 UNS N02201 Rectangular Bar
Alloy 201 Nickel Threaded Bar
ASTM B160 201 Nickel Flat Bar
Alloy 201 Bright Bar
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | ??-2 | – | LC-Ni 99 |
Most reliable Distributor of Nickel Alloy 201 Bars, ASTM B160 Nickel 201 Round Bars. Suppliers and Stockists of Nickel 201 Bar, Check Availability of Alloy 201 Flat Bar, Top-notch Manufacturer of 201 Nickel Threaded Bars, Exporter of Nickel 201 Hex Bar.
| UNS: |
N02201 |
|
Specifications: |
ASME SB-160 |
|
international Specifications: |
BS 3072, BS 3073, BS 3074, BS 3075, BS 3076, NA11 DIN 17740, 17750, 17751, 17752, 17753, 17754 Werkstoff Nr. 2.4060, 2.4066 |