Sheet and strip produced under specification ASTM B333 are required to undergo either hot or cold rolling, solution annealing, as well as a descaling process unless these components have been solution annealed in the atmosphere. The Hastelloy B2 Plate similar to the specified sheet and strips must undergo processes like hot or cold rolling, solution annealing, and descaling. In addition to a product analysis being conducted, the material, which in this case could be a WNR 2.4617 Foil is to not only conform to the chemical composition as mentioned; but it is also required to conform to the tensile properties.
Hastelloy B2 Plate
Alloy B3 Sheet
Nickel Alloy B2 Strip
In short, the ASTM B333 specified Alloy B2 Coil must conform to properties including tensile strength, yield strength, elongation values as well as Rockwell hardness. Moreover, the ASTM B333 UNS N10665 Sheet along with the strip needs to conform to the grain size requirement as mentioned in the specification. Alloy B3 Sheet have good weldability properties and if the correct techniques are used it is possible to produce high quality welds using the conventional arc welding processes.
A distinguishing feature between the Hastelloy UNS N10665 Polished Plates B3 and alloy B2 is that the former has greater structural stability, enhanced thermal stability in addition to offering improved fabrication properties. Nickel Alloy B2 Strip can be used in applications involving phosphoric acid and acetic acid and a range of organic acids, due to their good corrosion resistance property.
Nickel B2 Plate Thickness | 0.3 to 1200 mm or as required |
---|---|
Nickel Alloy B2 Plate Process | Hot/ Cold Rolled |
Hastelloy B2 Plate Length | 0-12mm or as required |
ASTM B575 UNS N10665 Plate Width | 0-2500mm or as required |
B2 Hastelloy Plate surface | No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled Hastelloy B2 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hastelloy B2 Plate, Sheet and Strip |
ASTM B 168/ASME SB 168, ASTM B 906/ASME SB 906, ASME Code Cases 1827 and N-253, SAE/AMS 5540, BS 3072NA14 and 3073NA14, DIN 17750, ISO 6208, EN 10095, MIL-DTL-23228. |
---|---|
Standard Hastelloy B2 Plate & Sheet Sizes |
1000 x 2000 mm, 1220 x 2440 mm, 1500 x 3000 mm, 2000 x 2000 mm, 2000 x 4000 mm
|
B2 Hastelloy Plate Hardness | Soft, Hard, Half Hard, Quarter Hard, Spring Hard Hastelloy B2 Sheet suppliers |
Availability of Hastelloy B2 Foil sizes |
Thickness : 8-100 microns (0.00031-0.004 in) Width: Up to 500 mm (19.5 in) Weight (in rolls) : Up to 50 kg (110 lb); e.g. approxi- mately 1400 m at 8 microns and ap- proximately 112 m at 100 microns. |
Profiling |
To provide a full profiling service in India we use numerous profiling methods including:
|
Hastelloy B2 Chequered Plate | Nickel B2 Quarto Plate |
Hastelloy Alloy B3 Clad Plate | Hastelloy UNS N010675 Tisco Plate |
Alloy B3 Chequer Plate | Hastelloy DIN 2.4617 Tread Plate |
Hastelloy UNS N010675 Checker Plate | B2 Hastelloy Polished Plate |
Hastelloy DIN 2.4617 Plate Mirror Finish | Hastelloy Alloy B3 Chequered Plate |
B2 Hastelloy Plate Brushed Finish | Hastelloy B2 Hot Rolled Sheet |
Hastelloy Alloy B3 10mm Plate | Hastelloy UNS N010675 Cold Rolled Sheet |
Hastelloy B2 1/4 Inch Plate | ASTM B575 UNS N10665 Perforated Sheet |
ASTM B575 UNS N10665 Plate | Nickel Alloy B2 Rolling Plate |
Nickel B2 Hot Rolled Plate | B2 Hastelloy Perforated Plate |
Nickel Alloy B2 Cold Rolled Plate | Hastelloy 2.4600 Bbq Plate |
B2 Hastelloy Plate 2b Finish | Hastelloy Alloy B3 Diamond Plate |
Hastelloy 2.4600 Plate Mill Finish | Alloy B3 Thin Plate |
Hastelloy UNS N010675 Custom Cut Plate | Nickel Alloy B2 Sheet |
ASTM B575 UNS N10665 Checkered Plate | Hastelloy B2 Laser Cut Plate |
Nickel Alloy B2 Embossed Plate | ASTM B575 UNS N10665 Plasma Cutting Plate |
Thickness | Alloy | Plate Weight per Unit Area | Density |
---|---|---|---|
3/16 inches | Hastelloy B3 | 0.06000 lbs/in²42.184176 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/4 inches | Hastelloy B3 | 0.08 lbs/in²56.245568 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/8 inches | Hastelloy B3 | 0.121 lbs/in²85.0714216 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1/2 inches | Hastelloy B3 | 0.161 lbs/in²113.1942056 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
5/8 inches | Hastelloy B3 | 0.196 lbs/in²137.8016416 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3/4 inches | Hastelloy B3 | 0.235 lbs/in²165.221356 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
7/8 inches | Hastelloy B3 | 0.274 lbs/in²192.6410704 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 inches | Hastelloy B3 | 0.313 lbs/in²220.0607848 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/4 inches | Hastelloy B3 | 0.391 lbs/in²274.9002136 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 1/2 inches | Hastelloy B3 | 0.47 lbs/in²330.442712 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
1 3/4 inches | Hastelloy B3 | 0.549 lbs/in²385.9852104 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 inches | Hastelloy B3 | 0.627 lbs/in²440.8246392 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/4 inches | Hastelloy B3 | 0.705 lbs/in²495.664068 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 1/2 inches | Hastelloy B3 | 0.784 lbs/in²551.2065664 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
2 3/4 inches | Hastelloy B3 | 0.862 lbs/in²606.0459952 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
3 inches | Hastelloy B3 | 0.941 lbs/in²661.5884936 kg/m² | 0.315 lbs/in³8.72 g/cm³ |
UNS: |
N10665 |
Specifications: |
ASME SB-333 |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Hastelloy B2 | 8.89 g/cm3 | 1370 °C (2500 °F) | Psi – 1,15,000 , MPa – 790 | Psi – 52,000 , MPa – 355 | 40 % |
Grade | C | Mn | Si | S | Co | Ni | Cr | Fe | Mo | P |
B2 | 0.010 max | 1.00 max | 0.08 max | 0.03 max | 2.50 max | 50.99 min* | 14.50 – 16.50 | 4.00 – 7.00 | 15.00 – 17.00 | 0.04 max |
STANDARD | WERKSTOFF NR. | UNS | JIS | GOST | EN | OR |
Hastelloy B2 | 2.4617 | N10665 | NW 0276 | ХН65МВУ | NiMo16Cr15W | ??760 |
Size (in inches)
|
Size (in mm)
|
---|---|
.125"
|
3.18mm
|
.134"
|
3.40mm
|
.156"
|
3.96mm
|
.187"
|
4.75mm
|
.250"
|
6.35mm
|
.312"
|
7.92mm
|
.375"
|
9.53mm
|
.500"
|
12.7mm
|
.600"
|
15.9mm
|
.750"
|
19.1mm
|
.875"
|
22.2mm
|
1"
|
25.4mm
|
1.125"
|
28.6mm
|
1.250"
|
31.8mm
|
1.500"
|
38.1mm
|
1.750"
|
44.5mm
|
2"
|
50.8mm
|
2.500"
|
63.5mm
|
3"
|
76.2mm
|