Inconel 718 seamless tube is used in varied markets including atmosphere, airplane, nourishment service, motorized, medical, and many others places, Inconel 718 seamless tube also has mixture of exceptional mechanical properties over a wide range of temperatures. In the say way Alloy 718 Tubing is an age hard enable nickel chromium iron alloy also covering important amounts of niobium, molybdenum, titanium and aluminum. It syndicates good corrosion resistance with tremendously high strength. Characteristically applications contain heat exchangers and O-rings. Similarly if we say something about Ni 718 Cold Drawn Tube is a rain hard enable nickel based alloy intended to display remarkably high yield, tensile and creep disagreement properties at contaminations up to 1300 Degree F.
Inconel 718 seamless tube
Alloy 718 Tubing
Ni 718 Cold Drawn Tube
Inconel 718 Tube is a nickel chromium alloy with respectable corrosion resistance to 2000 degree F. Good power and confrontation to general corrosion in a diversity of elements. Our Tarang Steel also provide many other industrial products all these products are manufacture in different sizes and shapes with high quality material as according to the demand and instruction of the global customers. In the same way if we talk about the extraordinary nickel gratified of Alloy 718 tubing delivers impressive corrosion resistance under plummeting conditions and by both carbon-based and mineral compounds. Nickel Alloy 718 Tubing have great power and resistance to corrosion, carburization and other damaging effects of high temperature contact.
Inconel Alloy 718 was the first of these alloys and it was marginally adapted into Inconel 718. This alteration was to switch carbon and ounce size to enhance stress disagreement properties. DIN 2.4668 Capillary Tube is intended to change the high pressure liquid refrigerant into a low weight sprig of refrigerant. Capillary tube is basically a growth device looks alike to this. Expansion is obligatory so that the refrigerant temperature while incoming into evaporator coil is low temperature so that heat movements from your room to the refrigerant in the loop and it spots.
Inconel 718 Tubing Standards | ASTM B163 / ASME SB163 |
---|---|
Inconel 718 Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
Marking | All ASTM B163 UNS N07718 Tubing are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Inconel 718 ASTM B163 Tubing Length | Single Random, Double Random, Standard & Cut length Tube |
Inconel 718 din 2.4668 Tubing Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
Specialize in | ASTM B163 UNS N07718 Capillary Tube & Other Odd Size Nickel 718 Heat Exchanger & Condenser Tube |
Form | ‘U’ bent, Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
Types of Alloy 718 Tubing | Seamless, ERW, EFW, Welded, Fabricated Tube / Tubing |
Inconel 718 din 2.4668 Tube wall thickness | 0.020" –0.220", (special wall thicknesses available) |
Alloy 718 Tube End | Plain End, Beveled End, Treaded Tube |
Inconel 718 Welded Tube Size | 6.35 mm OD To 152 mm OD |
718 Inconel Tubing Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
Application & uses of Inconel 718 seamless tube | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Manufacturers of Inconel 718 seamless tube |
|
We can also cut, thread, and groove Nickel 718 Tube to meet your specifications. Inconel 718 seamless tube Dimension ANSI/ ASME B36.10, B36.19, B2.1 |
Tube O.D. (in.) |
Wall Thickness of Tube (inches) | |||||||
---|---|---|---|---|---|---|---|---|
.028 | .035 | .049 | .065 | .083 | .095 | .109 | .120 | |
Working Pressure (psig) | ||||||||
1/8 | 7900 | 10100 | ||||||
1/4 | 3700 | 4800 | 7000 | 9500 | ||||
5/16 | 3700 | 5400 | 7300 | |||||
3/8 | 3100 | 4400 | 6100 | |||||
1/2 | 2300 | 3200 | 4400 | |||||
3/4 | 2200 | 3000 | 4000 | 4600 | ||||
1 | 2200 | 2900 | 3400 | 3900 | 4300 |
Inconel 718 din 2.4668 Electropolished Tubing | Nickel Alloy 718 Rectangular Tube |
Inconel 718 UNS N07718 Square Tubing | Nickel 718 Polished Tube |
Alloy 718 Tubing | Inconel alloy 718 Fabricated Tube |
Nickel Alloy 718 Seamless Tube | Inconel 718 ASTM B163 12mm Tube |
ASTM B163 UNS N07718 Welded Tube | Inconel 718 ASTM B163 Seamless Tubing |
Nickel 718 High Pressure Tube | 718 Inconel Thin Wall Tubing |
Alloy 718 Electropolished Tubes | Inconel 718 ASTM B163 Cold Drawn Seamless Tube |
Inconel 718 Hydraulic Tubing | 718 Inconel Coiled Tube |
Inconel alloy 718 ERW Tube | ASTM B163 UNS N07718 Electropolished Tube |
Nickel Alloy 718 Rectangular Tubing | Inconel 718 UNS N07718 CDW Tube |
Inconel 718 ASTM B163 Electropolish Tube | Inconel 718 Capillary Tubing |
ASTM B163 UNS N07718 Small Diameter Tubing | Inconel 718 din 2.4668 ERW Tubing |
Nickel 718 High Pressure Tubing | Alloy 718 High Pressure Tube |
Inconel 718 Tubing | Inconel 718 UNS N07718 Instrumentation tube |
Nickel Alloy 718 Tube | Inconel 718 UNS N07718 Round Tube |
ASTM B163 UNS N07718 EFW Tube | 718 Inconel Finned Tube |
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
718 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Grade | C | Mn | Si | Fe | S | Cr | Al | Ni | |
718 | min. | – | – | – | bal | – | 17.0 | 0.2 | 50.0 |
max. | 0.08 | 0.35 | 0.35 | bal | 0.01 | 21.0 | 0.8 | 55.0 |
Grade | UNS No | Old British | Euronorm | GOST | Japanese JIS | ||
BS | En | No | AFNOR | ||||
Inconel 718 | N07718 | – | – | 2.4668 | – | – | – |
UNS: |
N07718 |
Specifications: |
AMS 5589, AMS 5590 |
international Specifications: |
WERKSTOFF Nr 2.4668 |